Dong Guan Lang Ford Electronic Technology Co.,Ltd.
Address£º103,No.85,Guan Sui Road, Wan Jiang District,Dongguan City,Guangdong Province,China 523040
Email:lfv@lfvtech.com
Tel£º86-769-23889743
Fax£º86-769-23889743
Website£ºwww.lfvtech.com
No. | Item | Technical Parameter |
1 | Size(mm) | OD=76.2X50.8mm ID=63x38mm |
2 | Thickness | 0.15¡À0.05mm |
3 | Type: | rectangle |
4 | Color: | Black |
5 | Back Adhesive | with |
6 | Material | ePTFE M011 |
7 | Backing Material | 3M300SLE+PET backing 0.1¡À0.05mm |
8 | Air flow | 100% air pass |
9 | WIP | / |
10 | Temperature range | ¨C40¡æ¡«85¡æ |
11 | Ingress Protection | IP54 |
12 | Characteristic | 1. Waterproof 2. Comply with ROHS standard. 3. It is simple to assemble,stick on the area directly
|
13 | Installation method | 1.Before installation , must be ensured that surface is clean and smooth. 2.Manual operation or mechanical automotive pressure,It is recommended to open counterbore OD=76.2x50.8¡À0.1mm 3. Aim at the hole position,stick the membrane onto the hole surface 4. Slightly press edge of membrane a circle about 1.5s 5.Inspect the membrane,make sure in postion and appearance be well. |
14 | Storage Condition | Under temperature19¡æ-23¡æ,humidity:45%-60%,1 year |
15 | packaging | Packed by PE bag,then into box or carton |
No. | Item | Technical Parameter |
1 | Size(mm) | OD*ID=50.8X37..85mm |
2 | Thickness | 0.15¡À0.05mm |
3 | Type: | Round |
4 | Color: | Black |
5 | Back Adhesive | with |
6 | Material | ePTFE M011 |
7 | Backing Material | 3M300SLE+PET backing 0.1¡À0.05mm |
8 | Air flow | 100% air pass |
9 | WIP | / |
10 | Temperature range | ¨C40¡æ¡«85¡æ |
11 | Ingress Protection | IP54 |
12 | Characteristic | 1. Waterproof 2. Comply with ROHS standard. 3. It is simple to assemble,stick on the area directly
|
13 | Installation method | 1.Before installation , must be ensured that surface is clean and smooth. 2.Manual operation or mechanical automotive pressure,It is recommended to open counterbore OD=50.8¡À0.1mm 3. Aim at the hole position,stick the membrane onto the hole surface 4. Slightly press edge of membrane a circle about 1.5s 5.Inspect the membrane,make sure in postion and appearance be well. |
14 | Storage Condition | Under temperature19¡æ-23¡æ,humidity:45%-60%,1 year |
15 | packaging | Packed by PE bag,then into box or carton |